Reinforcing Construction Mesh

Reinforcing Construction Mesh 1.ISO9001-2008 certification 2.material: low-carbon steel or stainless steel 3.widely used.

Reinforcing Construction Mesh

 Welded steel wire mesh made from low carbon steel wire rods, which undergo a cold-rolling and straightening process, and then arranged vertically in proper spacing in the welding equipment both at line wires and at cross wires ,and joint together by mean of electric resistance spot-welding(also directly welded with hot-rolled wire rods ), turning into steel fabric mesh sheets..  The welded steel mesh has the following advantages over the reinforcing steel bar bundled by hand:   1.Insurance of Project Quality: great hardness, good elasticity, uniformity spacing, high welding strength, hard to deform by trample, easy to control the protect coat of concrete.2.Improving working efficiency: can save workers 50% and save construction time by 50%-70%.3.Enhancement of Anti-Cracking of concrete: crack reduction by more than 75%.4.Saving wire rods: can save wire rods by over than 25% the traditional bundled steel bar.5.Cut-Down of Cost: Decrease project cost. Properties of products:  

Item	HRB335Hot-rolled	HRB400Hot-rolled	CRB550Cold-rolled
Tensile strengthMpa	≥490	≥570	≥550
Yield strengthMpa	≥335	≥400	≥500
Elongation%	≥16	≥14	≥8
Designed strengthN/mm2	300	360	360
Shearing forceN	≥150×As	≥150×As	≥150×As
Elasticity ValueN/mm2	2.0×105	2.0×105	2.0×105

  Technocal Standard   Welded steel fabric for the reinforcement of concreteGB/T1499.3-2002Technical Specification for Concrete Structures Reinforced with Welded Steel FabricJGJ/T114-2003.J276-2003Hot rolled ribbed steel bars for the reinforcement of concreteGB1499-98Cold rolled ribbed steel barsGB13788-9  Scope of application: Welded mesh can be used in the multi-storey and high commercial building, airplane runway, road, and tunnel. Bridge, concrete pipes, waterdyke, dock, storage and sewage farm and so on. Type of products:There are two type of mesh made by our company: Stands mesh:Line wire diameter (nominal)            4.0 - 14.0  mmCross wire diameter (nominal)           4.0 14.0 mmLine wire spacing   100 / 150 / 200 /250/ 300 /350/ 400    mmCross wire spacing  100 / 150 / 200 / 300 / 400        mmOther and larger cross wire spacing freely programmableWire mesh length            2000 - 6000 mmWire mesh width         2000 -3300    mm Non-Stands mesh: Line wire diameter (nominal)            4.0 - 14.0  mmCross wire diameter (nominal)           4.0 14.0 mmLine wire spacing           min.    100 mmlarger line wire spacing in steps of            50  mmCross wire spacing        min  25mmabove programmable in increments of 0.1 mm.Wire mesh length:       2000 - 14000    mmWire mesh width:        1100 -3300    mm

Reinforcing Construction Mesh